MindView Inc.
[ Viewing Hints ] [ Revision History ] [ Book Home Page ] [ Free Newsletter ]
[ Seminars ] [ Seminars on CD ROM ] [ Consulting ]

Thinking in Java, 2nd edition, Revision 12

©2000 by Bruce Eckel

[ Previous Chapter ] [ Short TOC ] [ Table of Contents ] [ Index ] [ Next Chapter ]

4: Initialization
& Cleanup

As the computer revolution progresses, “unsafe” programming has become one of the major culprits that makes programming expensive.

Two of these safety issues are initialization and cleanup. Many C bugs occur when the programmer forgets to initialize a variable. This is especially true with libraries when users don’t know how to initialize a library component, or even that they must. Cleanup is a special problem because it’s easy to forget about an element when you’re done with it, since it no longer concerns you. Thus, the resources used by that element are retained and you can easily end up running out of resources (most notably, memory). [ Add Comment ]

C++ introduced the concept of a constructor, a special method automatically called when an object is created. Java also adopted the constructor, and in addition has a garbage collector that automatically releases memory resources when they’re no longer being used. This chapter examines the issues of initialization and cleanup, and their support in Java. [ Add Comment ]

Guaranteed initialization
with the constructor

You can imagine creating a method called initialize( ) for every class you write. The name is a hint that it should be called before using the object. Unfortunately, this means the user must remember to call the method. In Java, the class designer can guarantee initialization of every object by providing a special method called a constructor. If a class has a constructor, Java automatically calls that constructor when an object is created, before users can even get their hands on it. So initialization is guaranteed. [ Add Comment ]

The next challenge is what to name this method. There are two issues. The first is that any name you use could clash with a name you might like to use as a member in the class. The second is that because the compiler is responsible for calling the constructor, it must always know which method to call. The C++ solution seems the easiest and most logical, so it’s also used in Java: the name of the constructor is the same as the name of the class. It makes sense that such a method will be called automatically on initialization. [ Add Comment ]

Here’s a simple class with a constructor:

//: c04:SimpleConstructor.java
// Demonstration of a simple constructor.

class Rock {
  Rock() { // This is the constructor
    System.out.println("Creating Rock");
  }
}

public class SimpleConstructor {
  public static void main(String[] args) {
    for(int i = 0; i < 10; i++)
      new Rock();
  }
} ///:~

Now, when an object is created: [ Add Comment ]

new Rock();

storage is allocated and the constructor is called. It is guaranteed that the object will be properly initialized before you can get your hands on it. [ Add Comment ]

Note that the coding style of making the first letter of all methods lowercase does not apply to constructors, since the name of the constructor must match the name of the class exactly. [ Add Comment ]

Like any method, the constructor can have arguments to allow you to specify how an object is created. The above example can easily be changed so the constructor takes an argument:

//: c04:SimpleConstructor2.java
// Constructors can have arguments.

class Rock2 {
  Rock2(int i) {
    System.out.println(
      "Creating Rock number " + i);
  }
}

public class SimpleConstructor2 {
  public static void main(String[] args) {
    for(int i = 0; i < 10; i++)
      new Rock2(i);
  }
} ///:~

Constructor arguments provide you with a way to provide parameters for the initialization of an object. For example, if the class Tree has a constructor that takes a single integer argument denoting the height of the tree, you would create a Tree object like this: [ Add Comment ]

Tree t = new Tree(12);  // 12-foot tree

If Tree(int) is your only constructor, then the compiler won’t let you create a Tree object any other way. [ Add Comment ]

Constructors eliminate a large class of problems and make the code easier to read. In the preceding code fragment, for example, you don’t see an explicit call to some initialize( ) method that is conceptually separate from definition. In Java, definition and initialization are unified concepts—you can’t have one without the other. [ Add Comment ]

The constructor is an unusual type of method because it has no return value. This is distinctly different from a void return value, in which the method returns nothing but you still have the option to make it return something else. Constructors return nothing and you don’t have an option. If there was a return value, and if you could select your own, the compiler would somehow need to know what to do with that return value. [ Add Comment ]

Method overloading

One of the important features in any programming language is the use of names. When you create an object, you give a name to a region of storage. A method is a name for an action. By using names to describe your system, you create a program that is easier for people to understand and change. It’s a lot like writing prose—the goal is to communicate with your readers. [ Add Comment ]

You refer to all objects and methods by using names. Well-chosen names make it easier for you and others to understand your code. [ Add Comment ]

A problem arises when mapping the concept of nuance in human language onto a programming language. Often, the same word expresses a number of different meanings—it’s overloaded. This is useful, especially when it comes to trivial differences. You say “wash the shirt,” “wash the car,” and “wash the dog.” It would be silly to be forced to say, “shirtWash the shirt,” “carWash the car,” and “dogWash the dog” just so the listener doesn’t need to make any distinction about the action performed. Most human languages are redundant, so even if you miss a few words, you can still determine the meaning. We don’t need unique identifiers—we can deduce meaning from context. [ Add Comment ]

Most programming languages (C in particular) require you to have a unique identifier for each function. So you could not have one function called print( ) for printing integers and another called print( ) for printing floats—each function requires a unique name. [ Add Comment ]

In Java (and C++), another factor forces the overloading of method names: the constructor. Because the constructor’s name is predetermined by the name of the class, there can be only one constructor name. But what if you want to create an object in more than one way? For example, suppose you build a class that can initialize itself in a standard way or by reading information from a file. You need two constructors, one that takes no arguments (the default constructor, also called the no-arg constructor), and one that takes a String as an argument, which is the name of the file from which to initialize the object. Both are constructors, so they must have the same name—the name of the class. Thus, method overloading is essential to allow the same method name to be used with different argument types. And although method overloading is a must for constructors, it’s a general convenience and can be used with any method. [ Add Comment ]

Here’s an example that shows both overloaded constructors and overloaded ordinary methods:

//: c04:Overloading.java
// Demonstration of both constructor
// and ordinary method overloading.
import java.util.*;

class Tree {
  int height;
  Tree() {
    prt("Planting a seedling");
    height = 0;
  }
  Tree(int i) {
    prt("Creating new Tree that is "
        + i + " feet tall");
    height = i;
  }
  void info() {
    prt("Tree is " + height
        + " feet tall");
  }
  void info(String s) {
    prt(s + ": Tree is "
        + height + " feet tall");
  }
  static void prt(String s) {
    System.out.println(s);
  }
}

public class Overloading {
  public static void main(String[] args) {
    for(int i = 0; i < 5; i++) {
      Tree t = new Tree(i);
      t.info();
      t.info("overloaded method");
    }
    // Overloaded constructor:
    new Tree();
  }
} ///:~

A Tree object can be created either as a seedling, with no argument, or as a plant grown in a nursery, with an existing height. To support this, there are two constructors, one that takes no arguments (we call constructors that take no arguments default constructors[27]) and one that takes the existing height. [ Add Comment ]

You might also want to call the info( ) method in more than one way. For example, with a String argument if you have an extra message you want printed, and without if you have nothing more to say. It would seem strange to give two separate names to what is obviously the same concept. Fortunately, method overloading allows you to use the same name for both. [ Add Comment ]

Distinguishing overloaded methods

If the methods have the same name, how can Java know which method you mean? There’s a simple rule: each overloaded method must take a unique list of argument types. [ Add Comment ]

If you think about this for a second, it makes sense: how else could a programmer tell the difference between two methods that have the same name, other than by the types of their arguments? [ Add Comment ]

Even differences in the ordering of arguments are sufficient to distinguish two methods: (Although you don’t normally want to take this approach, as it produces difficult-to-maintain code.) [ Add Comment ]

//: c04:OverloadingOrder.java
// Overloading based on the order of
// the arguments.

public class OverloadingOrder {
  static void print(String s, int i) {
    System.out.println(
      "String: " + s +
      ", int: " + i);
  }
  static void print(int i, String s) {
    System.out.println(
      "int: " + i +
      ", String: " + s);
  }
  public static void main(String[] args) {
    print("String first", 11);
    print(99, "Int first");
  }
} ///:~

The two print( ) methods have identical arguments, but the order is different, and that’s what makes them distinct. [ Add Comment ]

Overloading with primitives

A primitive can be automatically promoted from a smaller type to a larger one and this can be slightly confusing in combination with overloading. The following example demonstrates what happens when a primitive is handed to an overloaded method:

//: c04:PrimitiveOverloading.java
// Promotion of primitives and overloading.

public class PrimitiveOverloading {
  // boolean can't be automatically converted
  static void prt(String s) { 
    System.out.println(s); 
  }

  void f1(char x) { prt("f1(char)"); }
  void f1(byte x) { prt("f1(byte)"); }
  void f1(short x) { prt("f1(short)"); }
  void f1(int x) { prt("f1(int)"); }
  void f1(long x) { prt("f1(long)"); }
  void f1(float x) { prt("f1(float)"); }
  void f1(double x) { prt("f1(double)"); }

  void f2(byte x) { prt("f2(byte)"); }
  void f2(short x) { prt("f2(short)"); }
  void f2(int x) { prt("f2(int)"); }
  void f2(long x) { prt("f2(long)"); }
  void f2(float x) { prt("f2(float)"); }
  void f2(double x) { prt("f2(double)"); }

  void f3(short x) { prt("f3(short)"); }
  void f3(int x) { prt("f3(int)"); }
  void f3(long x) { prt("f3(long)"); }
  void f3(float x) { prt("f3(float)"); }
  void f3(double x) { prt("f3(double)"); }

  void f4(int x) { prt("f4(int)"); }
  void f4(long x) { prt("f4(long)"); }
  void f4(float x) { prt("f4(float)"); }
  void f4(double x) { prt("f4(double)"); }

  void f5(long x) { prt("f5(long)"); }
  void f5(float x) { prt("f5(float)"); }
  void f5(double x) { prt("f5(double)"); }

  void f6(float x) { prt("f6(float)"); }
  void f6(double x) { prt("f6(double)"); }

  void f7(double x) { prt("f7(double)"); }

  void testConstVal() {
    prt("Testing with 5");
    f1(5);f2(5);f3(5);f4(5);f5(5);f6(5);f7(5);
  }
  void testChar() {
    char x = 'x';
    prt("char argument:");
    f1(x);f2(x);f3(x);f4(x);f5(x);f6(x);f7(x);
  }
  void testByte() {
    byte x = 0;
    prt("byte argument:");
    f1(x);f2(x);f3(x);f4(x);f5(x);f6(x);f7(x);
  }
  void testShort() {
    short x = 0;
    prt("short argument:");
    f1(x);f2(x);f3(x);f4(x);f5(x);f6(x);f7(x);
  }
  void testInt() {
    int x = 0;
    prt("int argument:");
    f1(x);f2(x);f3(x);f4(x);f5(x);f6(x);f7(x);
  }
  void testLong() {
    long x = 0;
    prt("long argument:");
    f1(x);f2(x);f3(x);f4(x);f5(x);f6(x);f7(x);
  }
  void testFloat() {
    float x = 0;
    prt("float argument:");
    f1(x);f2(x);f3(x);f4(x);f5(x);f6(x);f7(x);
  }
  void testDouble() {
    double x = 0;
    prt("double argument:");
    f1(x);f2(x);f3(x);f4(x);f5(x);f6(x);f7(x);
  }
  public static void main(String[] args) {
    PrimitiveOverloading p = 
      new PrimitiveOverloading();
    p.testConstVal();
    p.testChar();
    p.testByte();
    p.testShort();
    p.testInt();
    p.testLong();
    p.testFloat();
    p.testDouble();
  }
} ///:~

If you view the output of this program, you’ll see that the constant value 5 is treated as an int, so if an overloaded method is available that takes an int it is used. In all other cases, if you have a data type that is smaller than the argument in the method, that data type is promoted. char produces a slightly different effect, since if it doesn’t find an exact char match, it is promoted to int. [ Add Comment ]

What happens if your argument is bigger than the argument expected by the overloaded method? A modification of the above program gives the answer:

//: c04:Demotion.java
// Demotion of primitives and overloading.

public class Demotion {
  static void prt(String s) { 
    System.out.println(s); 
  }

  void f1(char x) { prt("f1(char)"); }
  void f1(byte x) { prt("f1(byte)"); }
  void f1(short x) { prt("f1(short)"); }
  void f1(int x) { prt("f1(int)"); }
  void f1(long x) { prt("f1(long)"); }
  void f1(float x) { prt("f1(float)"); }
  void f1(double x) { prt("f1(double)"); }

  void f2(char x) { prt("f2(char)"); }
  void f2(byte x) { prt("f2(byte)"); }
  void f2(short x) { prt("f2(short)"); }
  void f2(int x) { prt("f2(int)"); }
  void f2(long x) { prt("f2(long)"); }
  void f2(float x) { prt("f2(float)"); }

  void f3(char x) { prt("f3(char)"); }
  void f3(byte x) { prt("f3(byte)"); }
  void f3(short x) { prt("f3(short)"); }
  void f3(int x) { prt("f3(int)"); }
  void f3(long x) { prt("f3(long)"); }

  void f4(char x) { prt("f4(char)"); }
  void f4(byte x) { prt("f4(byte)"); }
  void f4(short x) { prt("f4(short)"); }
  void f4(int x) { prt("f4(int)"); }

  void f5(char x) { prt("f5(char)"); }
  void f5(byte x) { prt("f5(byte)"); }
  void f5(short x) { prt("f5(short)"); }

  void f6(char x) { prt("f6(char)"); }
  void f6(byte x) { prt("f6(byte)"); }

  void f7(char x) { prt("f7(char)"); }

  void testDouble() {
    double x = 0;
    prt("double argument:");
    f1(x);f2((float)x);f3((long)x);f4((int)x);
    f5((short)x);f6((byte)x);f7((char)x);
  }
  public static void main(String[] args) {
    Demotion p = new Demotion();
    p.testDouble();
  }
} ///:~

Here, the methods take narrower primitive values. If your argument is wider then you must cast to the necessary type using the type name in parentheses. If you don’t do this, the compiler will issue an error message. [ Add Comment ]

You should be aware that this is a narrowing conversion, which means you might lose information during the cast. This is why the compiler forces you to do it—to flag the narrowing conversion. [ Add Comment ]

Overloading on return values

It is common to wonder “Why only class names and method argument lists? Why not distinguish between methods based on their return values?” For example, these two methods, which have the same name and arguments, are easily distinguished from each other: [ Add Comment ]

void f() {}
int f() {}

This works fine when the compiler can unequivocally determine the meaning from the context, as in int x = f( ). However, you can call a method and ignore the return value; this is often referred to as calling a method for its side effect since you don’t care about the return value but instead want the other effects of the method call. So if you call the method this way: [ Add Comment ]

f();

how can Java determine which f( ) should be called? And how could someone reading the code see it? Because of this sort of problem, you cannot use return value types to distinguish overloaded methods. [ Add Comment ]

Default constructors

As mentioned previously, a default constructor (a.k.a. a “no-arg” constructor) is one without arguments, used to create a “vanilla object.” If you create a class that has no constructors, the compiler will automatically create a default constructor for you. For example: [ Add Comment ]

//: c04:DefaultConstructor.java

class Bird {
  int i;
}

public class DefaultConstructor {
  public static void main(String[] args) {
    Bird nc = new Bird(); // default!
  }
} ///:~

The line [ Add Comment ]

new Bird();

creates a new object and calls the default constructor, even though one was not explicitly defined. Without it we would have no method to call to build our object. However, if you define any constructors (with or without arguments), the compiler will not synthesize one for you: [ Add Comment ]

class Bush {
  Bush(int i) {}
  Bush(double d) {}
}

Now if you say: [ Add Comment ]

new Bush();

the compiler will complain that it cannot find a constructor that matches. It’s as if when you don’t put in any constructors, the compiler says “You are bound to need some constructor, so let me make one for you.” But if you write a constructor, the compiler says “You’ve written a constructor so you know what you’re doing; if you didn’t put in a default it’s because you meant to leave it out.” [ Add Comment ]

The this keyword

If you have two objects of the same type called a and b, you might wonder how it is that you can call a method f( ) for both those objects: [ Add Comment ]

class Banana { void f(int i) { /* ... */ } }
Banana a = new Banana(), b = new Banana();
a.f(1);
b.f(2);

If there’s only one method called f( ), how can that method know whether it’s being called for the object a or b? [ Add Comment ]

To allow you to write the code in a convenient object-oriented syntax in which you “send a message to an object,” the compiler does some undercover work for you. There’s a secret first argument passed to the method f( ), and that argument is the reference to the object that’s being manipulated. So the two method calls above become something like: [ Add Comment ]

Banana.f(a,1);
Banana.f(b,2);

This is internal and you can’t write these expressions and get the compiler to accept them, but it gives you an idea of what’s happening. [ Add Comment ]

Suppose you’re inside a method and you’d like to get the reference to the current object. Since that reference is passed secretly by the compiler, there’s no identifier for it. However, for this purpose there’s a keyword: this. The this keyword—which can be used only inside a method—produces the reference to the object the method has been called for. You can treat this reference just like any other object reference. Keep in mind that if you’re calling a method of your class from within another method of your class, you don’t need to use this; you simply call the method. The current this reference is automatically used for the other method. Thus you can say: [ Add Comment ]

class Apricot {
  void pick() { /* ... */ }
  void pit() { pick(); /* ... */ }
}

Inside pit( ), you could say this.pick( ) but there’s no need to. The compiler does it for you automatically. The this keyword is used only for those special cases in which you need to explicitly use the reference to the current object. For example, it’s often used in return statements when you want to return the reference to the current object: [ Add Comment ]

//: c04:Leaf.java
// Simple use of the "this" keyword.

public class Leaf {
  int i = 0;
  Leaf increment() {
    i++;
    return this;
  }
  void print() {
    System.out.println("i = " + i);
  }
  public static void main(String[] args) {
    Leaf x = new Leaf();
    x.increment().increment().increment().print();
  }
} ///:~

Because increment( ) returns the reference to the current object via the this keyword, multiple operations can easily be performed on the same object. [ Add Comment ]

Calling constructors from constructors

When you write several constructors for a class, there are times when you’d like to call one constructor from another to avoid duplicating code. You can do this using the this keyword. [ Add Comment ]

Normally, when you say this, it is in the sense of “this object” or “the current object,” and by itself it produces the reference to the current object. In a constructor, the this keyword takes on a different meaning when you give it an argument list: it makes an explicit call to the constructor that matches that argument list. Thus you have a straightforward way to call other constructors: [ Add Comment ]

//: c04:Flower.java
// Calling constructors with "this."

public class Flower {
  int petalCount = 0;
  String s = new String("null");
  Flower(int petals) {
    petalCount = petals;
    System.out.println(
      "Constructor w/ int arg only, petalCount= "
      + petalCount);
  }
  Flower(String ss) {
    System.out.println(
      "Constructor w/ String arg only, s=" + ss);
    s = ss;
  }
  Flower(String s, int petals) {
    this(petals);
//!    this(s); // Can't call two!
    this.s = s; // Another use of "this"
    System.out.println("String & int args");
  }
  Flower() {
    this("hi", 47);
    System.out.println(
      "default constructor (no args)");
  }
  void print() {
//!    this(11); // Not inside non-constructor!
    System.out.println(
      "petalCount = " + petalCount + " s = "+ s);
  }
  public static void main(String[] args) {
    Flower x = new Flower();
    x.print();
  }
} ///:~

The constructor Flower(String s, int petals) shows that, while you can call one constructor using this, you cannot call two. In addition, the constructor call must be the first thing you do or you’ll get a compiler error message. [ Add Comment ]

This example also shows another way you’ll see this used. Since the name of the argument s and the name of the member data s are the same, there’s an ambiguity. You can resolve it by saying this.s to refer to the member data. You’ll often see this form used in Java code, and it’s used in numerous places in this book. [ Add Comment ]

In print( ) you can see that the compiler won’t let you call a constructor from inside any method other than a constructor. [ Add Comment ]

The meaning of static

With the this keyword in mind, you can more fully understand what it means to make a method static. It means that there is no this for that particular method. You cannot call non-static methods from inside static methods[28] (although the reverse is possible), and you can call a static method for the class itself, without any object. In fact, that’s primarily what a static method is for. It’s as if you’re creating the equivalent of a global function (from C). Except global functions are not permitted in Java, and putting the static method inside a class allows it access to other static methods and to static fields. [ Add Comment ]

Some people argue that static methods are not object-oriented since they do have the semantics of a global function; with a static method you don’t send a message to an object, since there’s no this. This is probably a fair argument, and if you find yourself using a lot of static methods you should probably rethink your strategy. However, statics are pragmatic and there are times when you genuinely need them, so whether or not they are “proper OOP” should be left to the theoreticians. Indeed, even Smalltalk has the equivalent in its “class methods.”Add Comment ]

Cleanup: finalization and
garbage collection

Programmers know about the importance of initialization, but often forget the importance of cleanup. After all, who needs to clean up an int? But with libraries, simply “letting go” of an object once you’re done with it is not always safe. Of course, Java has the garbage collector to reclaim the memory of objects that are no longer used. Now consider a very unusual case. Suppose your object allocates “special” memory without using new. The garbage collector knows only how to release memory allocated with new, so it won’t know how to release the object’s “special” memory. To handle this case, Java provides a method called finalize( ) that you can define for your class. Here’s how it’s supposed to work. When the garbage collector is ready to release the storage used for your object, it will first call finalize( ), and only on the next garbage-collection pass will it reclaim the object’s memory. So if you choose to use finalize( ), it gives you the ability to perform some important cleanup at the time of garbage collection. [ Add Comment ]

This is a potential programming pitfall because some programmers, especially C++ programmers, might initially mistake finalize( ) for the destructor in C++, which is a function that is always called when an object is destroyed. But it is important to distinguish between C++ and Java here, because in C++ objects always get destroyed (in a bug-free program), whereas in Java objects do not always get garbage-collected. Or, put another way: [ Add Comment ]

Garbage collection is not destruction.

If you remember this, you will stay out of trouble. What it means is that if there is some activity that must be performed before you no longer need an object, you must perform that activity yourself. Java has no destructor or similar concept, so you must create an ordinary method to perform this cleanup. For example, suppose in the process of creating your object it draws itself on the screen. If you don’t explicitly erase its image from the screen, it might never get cleaned up. If you put some kind of erasing functionality inside finalize( ), then if an object is garbage-collected, the image will first be removed from the screen, but if it isn’t, the image will remain. So a second point to remember is: [ Add Comment ]

Your objects might not get garbage-collected.

You might find that the storage for an object never gets released because your program never nears the point of running out of storage. If your program completes and the garbage collector never gets around to releasing the storage for any of your objects, that storage will be returned to the operating system en masse as the program exits. This is a good thing, because garbage collection has some overhead, and if you never do it you never incur that expense. [ Add Comment ]

What is finalize( ) for?

You might believe at this point that you should not use finalize( ) as a general-purpose cleanup method. What good is it? [ Add Comment ]

A third point to remember is:

Garbage collection is only about memory.

That is, the sole reason for the existence of the garbage collector is to recover memory that your program is no longer using. So any activity that is associated with garbage collection, most notably your finalize( ) method, must also be only about memory and its deallocation. [ Add Comment ]

Does this mean that if your object contains other objects finalize( ) should explicitly release those objects? Well, no—the garbage collector takes care of the release of all object memory regardless of how the object is created. It turns out that the need for finalize( ) is limited to special cases, in which your object can allocate some storage in some way other than creating an object. But, you might observe, everything in Java is an object so how can this be? [ Add Comment ]

It would seem that finalize( ) is in place because of the possibility that you’ll do something C-like by allocating memory using a mechanism other than the normal one in Java. This can happen primarily through native methods, which are a way to call non-Java code from Java. (Native methods are discussed in Appendix B.) C and C++ are the only languages currently supported by native methods, but since they can call subprograms in other languages, you can effectively call anything. Inside the non-Java code, C’s malloc( ) family of functions might be called to allocate storage, and unless you call free( ) that storage will not be released, causing a memory leak. Of course, free( ) is a C and C++ function, so you’d need to call it in a native method inside your finalize( ). [ Add Comment ]

After reading this, you probably get the idea that you won’t use finalize( ) much. You’re correct; it is not the appropriate place for normal cleanup to occur. So where should normal cleanup be performed? [ Add Comment ]

You must perform cleanup

To clean up an object, the user of that object must call a cleanup method at the point the cleanup is desired. This sounds pretty straightforward, but it collides a bit with the C++ concept of the destructor. In C++, all objects are destroyed. Or rather, all objects should be destroyed. If the C++ object is created as a local (i.e., on the stack—not possible in Java), then the destruction happens at the closing curly brace of the scope in which the object was created. If the object was created using new (like in Java) the destructor is called when the programmer calls the C++ operator delete (which doesn’t exist in Java). If the C++ programmer forgets to call delete, the destructor is never called and you have a memory leak, plus the other parts of the object never get cleaned up. This kind of bug can be very difficult to track down. [ Add Comment ]

In contrast, Java doesn’t allow you to create local objects—you must always use new. But in Java, there’s no “delete” to call to release the object since the garbage collector releases the storage for you. So from a simplistic standpoint you could say that because of garbage collection, Java has no destructor. You’ll see as this book progresses, however, that the presence of a garbage collector does not remove the need for or utility of destructors. (And you should never call finalize( ) directly, so that’s not an appropriate avenue for a solution.) If you want some kind of cleanup performed other than storage release you must still explicitly call an appropriate method in Java, which is the equivalent of a C++ destructor without the convenience. [ Add Comment ]

One of the things finalize( ) can be useful for is observing the process of garbage collection. The following example shows you what’s going on and summarizes the previous descriptions of garbage collection:

//: c04:Garbage.java
// Demonstration of the garbage
// collector and finalization

class Chair {
  static boolean gcrun = false;
  static boolean f = false;
  static int created = 0;
  static int finalized = 0;
  int i;
  Chair() {
    i = ++created;
    if(created == 47) 
      System.out.println("Created 47");
  }
  public void finalize() {
    if(!gcrun) {
      // The first time finalize() is called:
      gcrun = true;
      System.out.println(
        "Beginning to finalize after " +
        created + " Chairs have been created");
    }
    if(i == 47) {
      System.out.println(
        "Finalizing Chair #47, " +
        "Setting flag to stop Chair creation");
      f = true;
    }
    finalized++;
    if(finalized >= created)
      System.out.println(
        "All " + finalized + " finalized");
  }
}

public class Garbage {
  public static void main(String[] args) {
    // As long as the flag hasn't been set,
    // make Chairs and Strings:
    while(!Chair.f) {
      new Chair();
      new String("To take up space");
    }
    System.out.println(
      "After all Chairs have been created:\n" +
      "total created = " + Chair.created +
      ", total finalized = " + Chair.finalized);
    // Optional arguments force garbage
    // collection & finalization:
    if(args.length > 0) {
      if(args[0].equals("gc") || 
         args[0].equals("all")) {
        System.out.println("gc():");
        System.gc();
      }
      if(args[0].equals("finalize") || 
         args[0].equals("all")) {
        System.out.println("runFinalization():");
        System.runFinalization();
      }
    }
    System.out.println("bye!");
  }
} ///:~

The above program creates many Chair objects, and at some point after the garbage collector begins running, the program stops creating Chairs. Since the garbage collector can run at any time, you don’t know exactly when it will start up, so there’s a flag called gcrun to indicate whether the garbage collector has started running yet. A second flag f is a way for Chair to tell the main( ) loop that it should stop making objects. Both of these flags are set within finalize( ), which is called during garbage collection. [ Add Comment ]

Two other static variables, created and finalized, keep track of the number of Chairs created versus the number that get finalized by the garbage collector. Finally, each Chair has its own (non-static) int i so it can keep track of what number it is. When Chair number 47 is finalized, the flag is set to true to bring the process of Chair creation to a stop. [ Add Comment ]

All this happens in main( ), in the loop

    while(!Chair.f) {
      new Chair();
      new String("To take up space");
    }

You might wonder how this loop could ever finish, since there’s nothing inside the loop that changes the value of Chair.f. However, the finalize( ) process will, eventually, when it finalizes number 47. [ Add Comment ]

The creation of a String object during each iteration is simply extra storage being allocated to encourage the garbage collector to kick in, which it will do when it starts to get nervous about the amount of memory available. [ Add Comment ]

When you run the program, you provide a command-line argument of “gc,” “finalize,” or “all.” The “gc” argument will call the System.gc( ) method (to force execution of the garbage collector). Using the “finalize” argument calls System.runFinalization( ) which—in theory—will cause any unfinalized objects to be finalized. And “all” causes both methods to be called. [ Add Comment ]

The behavior of this program and the version in the first edition of this book shows that the whole issue of garbage collection and finalization has been evolving, with much of the evolution happening behind closed doors. In fact, by the time you read this, the behavior of the program may have changed once again. [ Add Comment ]

If System.gc( ) is called, then finalization happens to all the objects. This was not necessarily the case with previous implementations of the JDK, although the documentation claimed otherwise. In addition, you’ll see that it doesn’t seem to make any difference whether System.runFinalization( ) is called. [ Add Comment ]

However, you will see that only if System.gc( ) is called after all the objects are created and discarded will all the finalizers be called. If you do not call System.gc( ), then only some of the objects will be finalized. In Java 1.1, a method System.runFinalizersOnExit( ) was introduced that caused programs to run all the finalizers as they exited, but the design turned out to be buggy and the method was deprecated. This is yet another clue that the Java designers were thrashing about trying to solve the garbage collection and finalization problem. We can only hope that things have been worked out in Java 2. [ Add Comment ]

The preceding program shows that the promise that finalizers will always be run holds true, but only if you explicitly force it to happen yourself. If you don’t cause System.gc( ) to be called, you’ll get an output like this:

Created 47
Beginning to finalize after 3486 Chairs have been created
Finalizing Chair #47, Setting flag to stop Chair creation
After all Chairs have been created:
total created = 3881, total finalized = 2684
bye!

Thus, not all finalizers get called by the time the program completes. If System.gc( ) is called, it will finalize and destroy all the objects that are no longer in use up to that point. [ Add Comment ]

Remember that neither garbage collection nor finalization is guaranteed. If the Java Virtual Machine (JVM) isn’t close to running out of memory, then it will (wisely) not waste time recovering memory through garbage collection. [ Add Comment ]

The death condition

In general, you can’t rely on finalize( ) being called, and you must create separate “cleanup” functions and call them explicitly. So it appears that finalize( ) is only useful for obscure memory cleanup that most programmers will never use. However, there is a very interesting use of finalize( ) which does not rely on it being called every time. This is the verification of the death condition[29] of an object. [ Add Comment ]

At the point that you’re no longer interested in an object—when it’s ready to be cleaned up—that object should be in a state whereby its memory can be safely released. For example, if the object represents an open file, that file should be closed by the programmer before the object is garbage-collected. If any portions of the object are not properly cleaned up, then you have a bug in your program that could be very difficult to find. The value of finalize( ) is that it can be used to discover this condition, even if it isn’t always called. If one of the finalizations happens to reveal the bug, then you discover the problem, which is all you really care about. [ Add Comment ]

Here’s a simple example of how you might use it:

//: c04:DeathCondition.java
// Using finalize() to detect an object that 
// hasn't been properly cleaned up.

class Book {
  boolean checkedOut = false;
  Book(boolean checkOut) { 
    checkedOut = checkOut; 
  }
  void checkIn() {
    checkedOut = false;
  }
  public void finalize() {
    if(checkedOut)
      System.out.println("Error: checked out");
  }
}

public class DeathCondition {
  public static void main(String[] args) {
    Book novel = new Book(true);
    // Proper cleanup:
    novel.checkIn();
    // Drop the reference, forget to clean up:
    new Book(true);
    // Force garbage collection & finalization:
    System.gc();
  }
} ///:~

The death condition is that all Book objects are supposed to be checked in before they are garbage-collected, but in main( ) a programmer error doesn’t check in one of the books. Without finalize( ) to verify the death condition, this could be a difficult bug to find. [ Add Comment ]

Note that System.gc( ) is used to force finalization (and you should do this during program development to speed debugging). But even if it isn’t, it’s highly probable that the errant Book will eventually be discovered through repeated executions of the program (assuming the program allocates enough storage to cause the garbage collector to execute). [ Add Comment ]

How a garbage collector works

If you come from a programming language where allocating objects on the heap is expensive, you may naturally assume that Java’s scheme of allocating everything (except primitives) on the heap is expensive. However, it turns out that the garbage collector can have a significant impact on increasing the speed of object creation. This might sound a bit odd at first—that storage release affects storage allocation—but it’s the way some JVMs work and it means that allocating storage for heap objects in Java can be nearly as fast as creating storage on the stack in other languages. [ Add Comment ]

For example, you can think of the C++ heap as a yard where each object stakes out its own piece of turf. This real estate can become abandoned sometime later and must be reused. In some JVMs, the Java heap is quite different; it’s more like a conveyor belt that moves forward every time you allocate a new object. This means that object storage allocation is remarkably rapid. The “heap pointer” is simply moved forward into virgin territory, so it’s effectively the same as C++’s stack allocation. (Of course, there’s a little extra overhead for bookkeeping but it’s nothing like searching for storage.) [ Add Comment ]

Now you might observe that the heap isn’t in fact a conveyor belt, and if you treat it that way you’ll eventually start paging memory a lot (which is a big performance hit) and later run out. The trick is that the garbage collector steps in and while it collects the garbage it compacts all the objects in the heap so that you’ve effectively moved the “heap pointer” closer to the beginning of the conveyor belt and further away from a page fault. The garbage collector rearranges things and makes it possible for the high-speed, infinite-free-heap model to be used while allocating storage. [ Add Comment ]

To understand how this works, you need to get a little better idea of the way the different garbage collector (GC) schemes work. A simple but slow GC technique is reference counting. This means that each object contains a reference counter, and every time a reference is attached to an object the reference count is increased. Every time a reference goes out of scope or is set to null, the reference count is decreased. Thus, managing reference counts is a small but constant overhead that happens throughout the lifetime of your program. The garbage collector moves through the entire list of objects and when it finds one with a reference count of zero it releases that storage. The one drawback is that if objects circularly refer to each other they can have nonzero reference counts while still being garbage. Locating such self-referential groups requires significant extra work for the garbage collector. Reference counting is commonly used to explain one kind of garbage collection but it doesn’t seem to be used in any JVM implementations. [ Add Comment ]

In faster schemes, garbage collection is not based on reference counting. Instead, it is based on the idea that any nondead object must ultimately be traceable back to a reference that lives either on the stack or in static storage. The chain might go through several layers of objects. Thus, if you start in the stack and the static storage area and walk through all the references you’ll find all the live objects. For each reference that you find, you must trace into the object that it points to and then follow all the references in that object, tracing into the objects they point to, etc., until you’ve moved through the entire web that originated with the reference on the stack or in static storage. Each object that you move through must still be alive. Note that there is no problem with detached self-referential groups—these are simply not found, and are therefore automatically garbage. [ Add Comment ]

In the approach described here, the JVM uses an adaptive garbage-collection scheme, and what it does with the live objects that it locates depends on the variant currently being used. One of these variants is stop-and-copy. This means that—for reasons that will become apparent—the program is first stopped (this is not a background collection scheme). Then, each live object that is found is copied from one heap to another, leaving behind all the garbage. In addition, as the objects are copied into the new heap they are packed end-to-end, thus compacting the new heap (and allowing new storage to simply be reeled off the end as previously described). [ Add Comment ]

Of course, when an object is moved from one place to another, all references that point at (i.e., that reference) the object must be changed. The reference that goes from the heap or the static storage area to the object can be changed right away, but there can be other references pointing to this object that will be encountered later during the “walk.” These are fixed up as they are found (you could imagine a table that maps old addresses to new ones). [ Add Comment ]

There are two issues that make these so-called “copy collectors” inefficient. The first is the idea that you have two heaps and you slosh all the memory back and forth between these two separate heaps, maintaining twice as much memory as you actually need. Some JVMs deal with this by allocating the heap in chunks as needed and simply copying from one chunk to another. [ Add Comment ]

The second issue is the copying. Once your program becomes stable it might be generating little or no garbage. Despite that, a copy collector will still copy all the memory from one place to another, which is wasteful. To prevent this, some JVMs detect that no new garbage is being generated and switch to a different scheme (this is the “adaptive” part). This other scheme is called mark and sweep, and it’s what earlier versions of Sun’s JVM used all the time. For general use, mark and sweep is fairly slow, but when you know you’re generating little or no garbage it’s fast. [ Add Comment ]

Mark and sweep follows the same logic of starting from the stack and static storage and tracing through all the references to find live objects. However, each time it finds a live object that object is marked by setting a flag in it, but the object isn’t collected yet. Only when the marking process is finished does the sweep occur. During the sweep, the dead objects are released. However, no copying happens, so if the collector chooses to compact a fragmented heap it does so by shuffling objects around. [ Add Comment ]

The “stop-and-copy” refers to the idea that this type of garbage collection is not done in the background; instead, the program is stopped while the GC occurs. In the Sun literature you’ll find many references to garbage collection as a low-priority background process, but it turns out that the GC was not implemented that way, at least in earlier versions of the Sun JVM. Instead, the Sun garbage collector ran when memory got low. In addition, mark-and-sweep requires that the program be stopped. [ Add Comment ]

As previously mentioned, in the JVM described here memory is allocated in big blocks. If you allocate a large object, it gets its own block. Strict stop-and-copy requires copying every live object from the source heap to a new heap before you could free the old one, which translates to lots of memory. With blocks, the GC can typically use dead blocks to copy objects to as it collects. Each block has a generation count to keep track of whether it’s alive. In the normal case, only the blocks created since the last GC are compacted; all other blocks get their generation count bumped if they have been referenced from somewhere. This handles the normal case of lots of short-lived temporary objects. Periodically, a full sweep is made—large objects are still not copied (just get their generation count bumped) and blocks containing small objects are copied and compacted. The JVM monitors the efficiency of GC and if it becomes a waste of time because all objects are long-lived then it switches to mark-and-sweep. Similarly, the JVM keeps track of how successful mark-and-sweep is, and if the heap starts to become fragmented it switches back to stop-and-copy. This is where the “adaptive” part comes in, so you end up with a mouthful: “adaptive generational stop-and-copy mark-and-sweep.” [ Add Comment ]

There are a number of additional speedups possible in a JVM. An especially important one involves the operation of the loader and Just-In-Time (JIT) compiler. When a class must be loaded (typically, the first time you want to create an object of that class), the .class file is located and the byte codes for that class are brought into memory. At this point, one approach is to simply JIT all the code, but this has two drawbacks: it takes a little more time, which, compounded throughout the life of the program, can add up; and it increases the size of the executable (byte codes are significantly more compact than expanded JIT code) and this might cause paging, which definitely slows down a program. An alternative approach is lazy evaluation, which means that the code is not JIT compiled until necessary. Thus, code that never gets executed might never get JIT compiled. [ Add Comment ]

Member initialization

Java goes out of its way to guarantee that variables are properly initialized before they are used. In the case of variables that are defined locally to a method, this guarantee comes in the form of a compile-time error. So if you say: [ Add Comment ]

  void f() {
    int i;
    i++;
  }

you’ll get an error message that says that i might not have been initialized. Of course, the compiler could have given i a default value, but it’s more likely that this is a programmer error and a default value would have covered that up. Forcing the programmer to provide an initialization value is more likely to catch a bug. [ Add Comment ]

If a primitive is a data member of a class, however, things are a bit different. Since any method can initialize or use that data, it might not be practical to force the user to initialize it to its appropriate value before the data is used. However, it’s unsafe to leave it with a garbage value, so each primitive data member of a class is guaranteed to get an initial value. Those values can be seen here: [ Add Comment ]

//: c04:InitialValues.java
// Shows default initial values.

class Measurement {
  boolean t;
  char c;
  byte b;
  short s;
  int i;
  long l;
  float f;
  double d;
  void print() {
    System.out.println(
      "Data type      Initial value\n" +
      "boolean        " + t + "\n" +
      "char           [" + c + "] "+ (int)c +"\n"+
      "byte           " + b + "\n" +
      "short          " + s + "\n" +
      "int            " + i + "\n" +
      "long           " + l + "\n" +
      "float          " + f + "\n" +
      "double         " + d);
  }
}

public class InitialValues {
  public static void main(String[] args) {
    Measurement d = new Measurement();
    d.print();
    /* In this case you could also say:
    new Measurement().print();
    */
  }
} ///:~

The output of this program is:

Data type      Initial value
boolean        false
char           [ ] 0
byte           0
short          0
int            0
long           0
float          0.0
double         0.0

The char value is a zero, which prints as a space. [ Add Comment ]

You’ll see later that when you define an object reference inside a class without initializing it to a new object, that reference is given a special value of null (which is a Java keyword). [ Add Comment ]

You can see that even though the values are not specified, they automatically get initialized. So at least there’s no threat of working with uninitialized variables. [ Add Comment ]

Specifying initialization

What happens if you want to give a variable an initial value? One direct way to do this is simply to assign the value at the point you define the variable in the class. (Notice you cannot do this in C++, although C++ novices always try.) Here the field definitions in class Measurement are changed to provide initial values:

class Measurement {
  boolean b = true;
  char c = 'x';
  byte B = 47;
  short s = 0xff;
  int i = 999;
  long l = 1;
  float f = 3.14f;
  double d = 3.14159;
  //. . .

You can also initialize nonprimitive objects in this same way. If Depth is a class, you can insert a variable and initialize it like so: [ Add Comment ]

class Measurement {
  Depth o = new Depth();
  boolean b = true;
  // . . .

If you haven’t given o an initial value and you try to use it anyway, you’ll get a run-time error called an exception (covered in Chapter 10). [ Add Comment ]

You can even call a method to provide an initialization value:

class CInit {
  int i = f();
  //...
}

This method can have arguments, of course, but those arguments cannot be other class members that haven’t been initialized yet. Thus, you can do this: [ Add Comment ]

class CInit {
  int i = f();
  int j = g(i);
  //...
}

But you cannot do this: [ Add Comment ]

class CInit {
  int j = g(i);
  int i = f();
  //...
}

This is one place in which the compiler, appropriately, does complain about forward referencing, since this has to do with the order of initialization and not the way the program is compiled. [ Add Comment ]

This approach to initialization is simple and straightforward. It has the limitation that every object of type Measurement will get these same initialization values. Sometimes this is exactly what you need, but at other times you need more flexibility. [ Add Comment ]

Constructor initialization

The constructor can be used to perform initialization, and this gives you greater flexibility in your programming since you can call methods and perform actions at run-time to determine the initial values. There’s one thing to keep in mind, however: you aren’t precluding the automatic initialization, which happens before the constructor is entered. So, for example, if you say:

class Counter {
  int i;
  Counter() { i = 7; }
  // . . .

then i will first be initialized to 0, then to 7. This is true with all the primitive types and with object references, including those that are given explicit initialization at the point of definition. For this reason, the compiler doesn’t try to force you to initialize elements in the constructor at any particular place, or before they are used—initialization is already guaranteed[30]. [ Add Comment ]

Order of initialization

Within a class, the order of initialization is determined by the order that the variables are defined within the class. The variable definitions may be scattered throughout and in between method definitions, but the variables are initialized before any methods can be called—even the constructor. For example: [ Add Comment ]

//: c04:OrderOfInitialization.java
// Demonstrates initialization order.

// When the constructor is called to create a
// Tag object, you'll see a message:
class Tag {
  Tag(int marker) {
    System.out.println("Tag(" + marker + ")");
  }
}

class Card {
  Tag t1 = new Tag(1); // Before constructor
  Card() {
    // Indicate we're in the constructor:
    System.out.println("Card()");
    t3 = new Tag(33); // Reinitialize t3
  }
  Tag t2 = new Tag(2); // After constructor
  void f() {
    System.out.println("f()");
  }
  Tag t3 = new Tag(3); // At end
}

public class OrderOfInitialization {
  public static void main(String[] args) {
    Card t = new Card();
    t.f(); // Shows that construction is done
  }
} ///:~

In Card, the definitions of the Tag objects are intentionally scattered about to prove that they’ll all get initialized before the constructor is entered or anything else can happen. In addition, t3 is reinitialized inside the constructor. The output is: [ Add Comment ]

Tag(1)
Tag(2)
Tag(3)
Card()
Tag(33)
f()

Thus, the t3 reference gets initialized twice, once before and once during the constructor call. (The first object is dropped, so it can be garbage-collected later.) This might not seem efficient at first, but it guarantees proper initialization—what would happen if an overloaded constructor were defined that did not initialize t3 and there wasn’t a “default” initialization for t3 in its definition? [ Add Comment ]

Static data initialization

When the data is static the same thing happens; if it’s a primitive and you don’t initialize it, it gets the standard primitive initial values. If it’s a reference to an object, it’s null unless you create a new object and attach your reference to it. [ Add Comment ]

If you want to place initialization at the point of definition, it looks the same as for non-statics. There’s only a single piece of storage for a static, regardless of how many objects are created. But the question arises of when the static storage gets initialized. An example makes this question clear: [ Add Comment ]

//: c04:StaticInitialization.java
// Specifying initial values in a
// class definition.

class Bowl {
  Bowl(int marker) {
    System.out.println("Bowl(" + marker + ")");
  }
  void f(int marker) {
    System.out.println("f(" + marker + ")");
  }
}

class Table {
  static Bowl b1 = new Bowl(1);
  Table() {
    System.out.println("Table()");
    b2.f(1);
  }
  void f2(int marker) {
    System.out.println("f2(" + marker + ")");
  }
  static Bowl b2 = new Bowl(2);
}

class Cupboard {
  Bowl b3 = new Bowl(3);
  static Bowl b4 = new Bowl(4);
  Cupboard() {
    System.out.println("Cupboard()");
    b4.f(2);
  }
  void f3(int marker) {
    System.out.println("f3(" + marker + ")");
  }
  static Bowl b5 = new Bowl(5);
}

public class StaticInitialization {
  public static void main(String[] args) {
    System.out.println(
      "Creating new Cupboard() in main");
    new Cupboard();
    System.out.println(
      "Creating new Cupboard() in main");
    new Cupboard();
    t2.f2(1);
    t3.f3(1);
  }
  static Table t2 = new Table();
  static Cupboard t3 = new Cupboard();
} ///:~

Bowl allows you to view the creation of a class, and Table and Cupboard create static members of Bowl scattered through their class definitions. Note that Cupboard creates a non-static Bowl b3 prior to the static definitions. The output shows what happens: [ Add Comment ]

Bowl(1)
Bowl(2)
Table()
f(1)
Bowl(4)
Bowl(5)
Bowl(3)
Cupboard()
f(2)
Creating new Cupboard() in main
Bowl(3)
Cupboard()
f(2)
Creating new Cupboard() in main
Bowl(3)
Cupboard()
f(2)
f2(1)
f3(1)

The static initialization occurs only if it’s necessary. If you don’t create a Table object and you never refer to Table.b1 or Table.b2, the static Bowl b1 and b2 will never be created. However, they are initialized only when the first Table object is created (or the first static access occurs). After that, the static objects are not reinitialized. [ Add Comment ]

The order of initialization is statics first, if they haven’t already been initialized by a previous object creation, and then the non-static objects. You can see the evidence of this in the output. [ Add Comment ]

It’s helpful to summarize the process of creating an object. Consider a class called Dog: [ Add Comment ]

  1. The first time an object of type Dog is created, or the first time a static method or static field of class Dog is accessed, the Java interpreter must locate Dog.class, which it does by searching through the classpath. [ Add Comment ]
  2. As Dog.class is loaded (creating a Class object, which you’ll learn about later), all of its static initializers are run. Thus, static initialization takes place only once, as the Class object is loaded for the first time. [ Add Comment ]
  3. When you create a new Dog( ), the construction process for a Dog object first allocates enough storage for a Dog object on the heap. [ Add Comment ]
  4. This storage is wiped to zero, automatically setting all the primitives in that Dog object to their default values (zero for numbers and the equivalent for boolean and char) and the references to null. [ Add Comment ]
  5. Any initializations that occur at the point of field definition are executed. [ Add Comment ]
  6. Constructors are executed. As you shall see in Chapter 6, this might actually involve a fair amount of activity, especially when inheritance is involved. [ Add Comment ]

Explicit static initialization

Java allows you to group other static initializations inside a special “static construction clause” (sometimes called a static block) in a class. It looks like this: [ Add Comment ]

class Spoon {
  static int i;
  static {
    i = 47;
  }
  // . . .

It appears to be a method, but it’s just the static keyword followed by a method body. This code, like other static initializations, is executed only once, the first time you make an object of that class or the first time you access a static member of that class (even if you never make an object of that class). For example: [ Add Comment ]

//: c04:ExplicitStatic.java
// Explicit static initialization
// with the "static" clause.

class Cup {
  Cup(int marker) {
    System.out.println("Cup(" + marker + ")");
  }
  void f(int marker) {
    System.out.println("f(" + marker + ")");
  }
}

class Cups {
  static Cup c1;
  static Cup c2;
  static {
    c1 = new Cup(1);
    c2 = new Cup(2);
  }
  Cups() {
    System.out.println("Cups()");
  }
}

public class ExplicitStatic {
  public static void main(String[] args) {
    System.out.println("Inside main()");
    Cups.c1.f(99);  // (1)
  }
  // static Cups x = new Cups();  // (2)
  // static Cups y = new Cups();  // (2) 
} ///:~

The static initializers for Cups run when either the access of the static object c1 occurs on the line marked (1), or if line (1) is commented out and the lines marked (2) are uncommented. If both (1) and (2) are commented out, the static initialization for Cups never occurs. Also, it doesn’t matter if one or both of the lines marked (2) are uncommented; the static initialization only occurs once. [ Add Comment ]

Non-static instance initialization

Java provides a similar syntax for initializing non-static variables for each object. Here’s an example:

//: c04:Mugs.java
// Java "Instance Initialization."

class Mug {
  Mug(int marker) {
    System.out.println("Mug(" + marker + ")");
  }
  void f(int marker) {
    System.out.println("f(" + marker + ")");
  }
}

public class Mugs {
  Mug c1;
  Mug c2;
  {
    c1 = new Mug(1);
    c2 = new Mug(2);
    System.out.println("c1 & c2 initialized");
  }
  Mugs() {
    System.out.println("Mugs()");
  }
  public static void main(String[] args) {
    System.out.println("Inside main()");
    Mugs x = new Mugs();
  }
} ///:~

You can see that the instance initialization clause: [ Add Comment ]

  {
    c1 = new Mug(1);
    c2 = new Mug(2);
    System.out.println("c1 & c2 initialized");
  }

looks exactly like the static initialization clause except for the missing static keyword. This syntax is necessary to support the initialization of anonymous inner classes (see Chapter 8). [ Add Comment ]

Array initialization

Initializing arrays in C is error-prone and tedious. C++ uses aggregate initialization to make it much safer[31]. Java has no “aggregates” like C++, since everything is an object in Java. It does have arrays, and these are supported with array initialization. [ Add Comment ]

An array is simply a sequence of either objects or primitives, all the same type and packaged together under one identifier name. Arrays are defined and used with the square-brackets indexing operator [ ]. To define an array you simply follow your type name with empty square brackets: [ Add Comment ]

int[] a1;

You can also put the square brackets after the identifier to produce exactly the same meaning: [ Add Comment ]

int a1[];

This conforms to expectations from C and C++ programmers. The former style, however, is probably a more sensible syntax, since it says that the type is “an int array.” That style will be used in this book. [ Add Comment ]

The compiler doesn’t allow you to tell it how big the array is. This brings us back to that issue of “references.” All that you have at this point is a reference to an array, and there’s been no space allocated for the array. To create storage for the array you must write an initialization expression. For arrays, initialization can appear anywhere in your code, but you can also use a special kind of initialization expression that must occur at the point where the array is created. This special initialization is a set of values surrounded by curly braces. The storage allocation (the equivalent of using new) is taken care of by the compiler in this case. For example: [ Add Comment ]

int[] a1 = { 1, 2, 3, 4, 5 };

So why would you ever define an array reference without an array? [ Add Comment ]

int[] a2;

Well, it’s possible to assign one array to another in Java, so you can say: [ Add Comment ]

a2 = a1;

What you’re really doing is copying a reference, as demonstrated here: [ Add Comment ]

//: c04:Arrays.java
// Arrays of primitives.

public class Arrays {
  public static void main(String[] args) {
    int[] a1 = { 1, 2, 3, 4, 5 };
    int[] a2;
    a2 = a1;
    for(int i = 0; i < a2.length; i++)
      a2[i]++;
    for(int i = 0; i < a1.length; i++)
      System.out.println(
        "a1[" + i + "] = " + a1[i]);
  }
} ///:~

You can see that a1 is given an initialization value while a2 is not; a2 is assigned later—in this case, to another array. [ Add Comment ]

There’s something new here: all arrays have an intrinsic member (whether they’re arrays of objects or arrays of primitives) that you can query—but not change—to tell you how many elements there are in the array. This member is length. Since arrays in Java, like C and C++, start counting from element zero, the largest element you can index is length - 1. If you go out of bounds, C and C++ quietly accept this and allow you to stomp all over your memory, which is the source of many infamous bugs. However, Java protects you against such problems by causing a run-time error (an exception, the subject of Chapter 10) if you step out of bounds. Of course, checking every array access costs time and code and there’s no way to turn it off, which means that array accesses might be a source of inefficiency in your program if they occur at a critical juncture. For Internet security and programmer productivity, the Java designers thought that this was a worthwhile trade-off. [ Add Comment ]

What if you don’t know how many elements you’re going to need in your array while you’re writing the program? You simply use new to create the elements in the array. Here, new works even though it’s creating an array of primitives (new won’t create a nonarray primitive): [ Add Comment ]

//: c04:ArrayNew.java
// Creating arrays with new.
import java.util.*;

public class ArrayNew {
  static Random rand = new Random();
  static int pRand(int mod) {
    return Math.abs(rand.nextInt()) % mod + 1;
  }
  public static void main(String[] args) {
    int[] a;
    a = new int[pRand(20)];
    System.out.println(
      "length of a = " + a.length);
    for(int i = 0; i < a.length; i++)
      System.out.println(
        "a[" + i + "] = " + a[i]);
  }
} ///:~

Since the size of the array is chosen at random (using the pRand( ) method), it’s clear that array creation is actually happening at run-time. In addition, you’ll see from the output of this program that array elements of primitive types are automatically initialized to “empty” values. (For numerics and char, this is zero, and for boolean, it’s false.) [ Add Comment ]

Of course, the array could also have been defined and initialized in the same statement:

int[] a = new int[pRand(20)];

If you’re dealing with an array of nonprimitive objects, you must always use new. Here, the reference issue comes up again because what you create is an array of references. Consider the wrapper type Integer, which is a class and not a primitive: [ Add Comment ]

//: c04:ArrayClassObj.java
// Creating an array of nonprimitive objects.
import java.util.*;

public class ArrayClassObj {
  static Random rand = new Random();
  static int pRand(int mod) {
    return Math.abs(rand.nextInt()) % mod + 1;
  }
  public static void main(String[] args) {
    Integer[] a = new Integer[pRand(20)];
    System.out.println(
      "length of a = " + a.length);
    for(int i = 0; i < a.length; i++) {
      a[i] = new Integer(pRand(500));
      System.out.println(
        "a[" + i + "] = " + a[i]);
    }
  }
} ///:~

Here, even after new is called to create the array: [ Add Comment ]

Integer[] a = new Integer[pRand(20)];

it’s only an array of references, and not until the reference itself is initialized by creating a new Integer object is the initialization complete: [ Add Comment ]

a[i] = new Integer(pRand(500));

If you forget to create the object, however, you’ll get an exception at run-time when you try to read the empty array location. [ Add Comment ]

Take a look at the formation of the String object inside the print statements. You can see that the reference to the Integer object is automatically converted to produce a String representing the value inside the object. [ Add Comment ]

It’s also possible to initialize arrays of objects using the curly-brace-enclosed list. There are two forms:

//: c04:ArrayInit.java
// Array initialization.

public class ArrayInit {
  public static void main(String[] args) {
    Integer[] a = {
      new Integer(1),
      new Integer(2),
      new Integer(3),
    };

    Integer[] b = new Integer[] {
      new Integer(1),
      new Integer(2),
      new Integer(3),
    };
  }
} ///:~

This is useful at times, but it’s more limited since the size of the array is determined at compile-time. The final comma in the list of initializers is optional. (This feature makes for easier maintenance of long lists.) [ Add Comment ]

The second form of array initialization provides a convenient syntax to create and call methods that can produce the same effect as C’s variable argument lists (known as “varargs” in C). These can include unknown quantity of arguments as well as unknown types. Since all classes are ultimately inherited from the common root class Object (a subject you will learn more about as this book progresses), you can create a method that takes an array of Object and call it like this: [ Add Comment ]

//: c04:VarArgs.java
// Using the array syntax to create
// variable argument lists.

class A { int i; }

public class VarArgs {
  static void f(Object[] x) {
    for(int i = 0; i < x.length; i++)
      System.out.println(x[i]);
  }
  public static void main(String[] args) {
    f(new Object[] { 
        new Integer(47), new VarArgs(), 
        new Float(3.14), new Double(11.11) });
    f(new Object[] {"one", "two", "three" });
    f(new Object[] {new A(), new A(), new A()});
  }
} ///:~

At this point, there’s not much you can do with these unknown objects, and this program uses the automatic String conversion to do something useful with each Object. In Chapter 12, which covers run-time type identification (RTTI), you’ll learn how to discover the exact type of such objects so that you can do something more interesting with them. [ Add Comment ]

Multidimensional arrays

Java allows you to easily create multidimensional arrays:

//: c04:MultiDimArray.java
// Creating multidimensional arrays.
import java.util.*;

public class MultiDimArray {
  static Random rand = new Random();
  static int pRand(int mod) {
    return Math.abs(rand.nextInt()) % mod + 1;
  }
  static void prt(String s) {
    System.out.println(s);
  }
  public static void main(String[] args) {
    int[][] a1 = {
      { 1, 2, 3, },
      { 4, 5, 6, },
    };
    for(int i = 0; i < a1.length; i++)
      for(int j = 0; j < a1[i].length; j++)
        prt("a1[" + i + "][" + j +
            "] = " + a1[i][j]);
    // 3-D array with fixed length:
    int[][][] a2 = new int[2][2][4];
    for(int i = 0; i < a2.length; i++)
      for(int j = 0; j < a2[i].length; j++)
        for(int k = 0; k < a2[i][j].length;
            k++)
          prt("a2[" + i + "][" +
              j + "][" + k +
              "] = " + a2[i][j][k]);
    // 3-D array with varied-length vectors:
    int[][][] a3 = new int[pRand(7)][][];
    for(int i = 0; i < a3.length; i++) {
      a3[i] = new int[pRand(5)][];
      for(int j = 0; j < a3[i].length; j++)
        a3[i][j] = new int[pRand(5)];
    }
    for(int i = 0; i < a3.length; i++)
      for(int j = 0; j < a3[i].length; j++)
        for(int k = 0; k < a3[i][j].length;
            k++)
          prt("a3[" + i + "][" +
              j + "][" + k +
              "] = " + a3[i][j][k]);
    // Array of nonprimitive objects:
    Integer[][] a4 = {
      { new Integer(1), new Integer(2)},
      { new Integer(3), new Integer(4)},
      { new Integer(5), new Integer(6)},
    };
    for(int i = 0; i < a4.length; i++)
      for(int j = 0; j < a4[i].length; j++)
        prt("a4[" + i + "][" + j +
            "] = " + a4[i][j]);
    Integer[][] a5;
    a5 = new Integer[3][];
    for(int i = 0; i < a5.length; i++) {
      a5[i] = new Integer[3];
      for(int j = 0; j < a5[i].length; j++)
        a5[i][j] = new Integer(i*j);
    }
    for(int i = 0; i < a5.length; i++)
      for(int j = 0; j < a5[i].length; j++)
        prt("a5[" + i + "][" + j +
            "] = " + a5[i][j]);
  }
} ///:~

The code used for printing uses length so that it doesn’t depend on fixed array sizes. [ Add Comment ]

The first example shows a multidimensional array of primitives. You delimit each vector in the array with curly braces:

    int[][] a1 = {
      { 1, 2, 3, },
      { 4, 5, 6, },
    };

Each set of square brackets moves you into the next level of the array. [ Add Comment ]

The second example shows a three-dimensional array allocated with new. Here, the whole array is allocated at once:

int[][][] a2 = new int[2][2][4];

But the third example shows that each vector in the arrays that make up the matrix can be of any length:

    int[][][] a3 = new int[pRand(7)][][];
    for(int i = 0; i < a3.length; i++) {
      a3[i] = new int[pRand(5)][];
      for(int j = 0; j < a3[i].length; j++)
        a3[i][j] = new int[pRand(5)];
    }

The first new creates an array with a random-length first element and the rest undetermined. The second new inside the for loop fills out the elements but leaves the third index undetermined until you hit the third new. [ Add Comment ]

You will see from the output that array values are automatically initialized to zero if you don’t give them an explicit initialization value.

You can deal with arrays of nonprimitive objects in a similar fashion, which is shown in the fourth example, demonstrating the ability to collect many new expressions with curly braces:

    Integer[][] a4 = {
      { new Integer(1), new Integer(2)},
      { new Integer(3), new Integer(4)},
      { new Integer(5), new Integer(6)},
    };

The fifth example shows how an array of nonprimitive objects can be built up piece by piece:

    Integer[][] a5;
    a5 = new Integer[3][];
    for(int i = 0; i < a5.length; i++) {
      a5[i] = new Integer[3];
      for(int j = 0; j < a5[i].length; j++)
        a5[i][j] = new Integer(i*j);
    }

The i*j is just to put an interesting value into the Integer. [ Add Comment ]

Summary

This seemingly elaborate mechanism for initialization, the constructor, should give you a strong hint about the critical importance placed on initialization in the language. As Stroustrup was designing C++, one of the first observations he made about productivity in C was that improper initialization of variables causes a significant portion of programming problems. These kinds of bugs are hard to find, and similar issues apply to improper cleanup. Because constructors allow you to guarantee proper initialization and cleanup (the compiler will not allow an object to be created without the proper constructor calls), you get complete control and safety. [ Add Comment ]

In C++, destruction is quite important because objects created with new must be explicitly destroyed. In Java, the garbage collector automatically releases the memory for all objects, so the equivalent cleanup method in Java isn’t necessary much of the time. In cases where you don’t need destructor-like behavior, Java’s garbage collector greatly simplifies programming, and adds much-needed safety in managing memory. Some garbage collectors can even clean up other resources like graphics and file handles. However, the garbage collector does add a run-time cost, the expense of which is difficult to put into perspective because of the overall slowness of Java interpreters at this writing. As this changes, we’ll be able to discover if the overhead of the garbage collector will preclude the use of Java for certain types of programs. (One of the issues is the unpredictability of the garbage collector.) [ Add Comment ]

Because of the guarantee that all objects will be constructed, there’s actually more to the constructor than what is shown here. In particular, when you create new classes using either composition or inheritance the guarantee of construction also holds, and some additional syntax is necessary to support this. You’ll learn about composition, inheritance, and how they affect constructors in future chapters. [ Add Comment ]

Exercises

Solutions to selected exercises can be found in the electronic document The Thinking in Java Annotated Solution Guide, available for a small fee from www.BruceEckel.com.

  1. Create a class with a default constructor (one that takes no arguments) that prints a message. Create an object of this class. [ Add Comment ]
  2. Add an overloaded constructor to Exercise 1 that takes a String argument and prints it along with your message. [ Add Comment ]
  3. Create an array of object references of the class you created in Exercise 2, but don’t actually create objects to assign into the array. When you run the program, notice whether the initialization messages from the constructor calls are printed. [ Add Comment ]
  4. Complete Exercise 3 by creating objects to attach to the array of references. [ Add Comment ]
  5. Create an array of String objects and assign a string to each element. Print the array using a for loop. [ Add Comment ]
  6. Create a class called Dog with an overloaded bark( ) method. This method should be overloaded based on various primitive data types, and print different types of barking, howling, etc., depending on which overloaded version is called. Write a main( ) that calls all the different versions. [ Add Comment ]
  7. Modify Exercise 6 so that two of the overloaded methods have two arguments (of two different types), but in reversed order relative to each other. Verify that this works. [ Add Comment ]
  8. Create a class without a constructor, and then create an object of that class in main( ) to verify that the default constructor is automatically synthesized. [ Add Comment ]
  9. Create a class with two methods. Within the first method, call the second method twice: the first time without using this, and the second time using this. [ Add Comment ]
  10. Create a class with two (overloaded) constructors. Using this, call the second constructor inside the first one. [ Add Comment ]
  11. Create a class with a finalize( ) method that prints a message. In main( ), create an object of your class. Explain the behavior of your program. [ Add Comment ]
  12. Modify Exercise 11 so that your finalize( ) will always be called. [ Add Comment ]
  13. Create a class called Tank that can be filled and emptied, and has a death condition that it must be empty when the object is cleaned up. Write a finalize( ) that verifies this death condition. In main( ), test the possible scenarios that can occur when your Tank is used. [ Add Comment ]
  14. Create a class containing an int and a char that are not initialized, and print their values to verify that Java performs default initialization. [ Add Comment ]
  15. Create a class containing an uninitialized String reference. Demonstrate that this reference is initialized by Java to null. [ Add Comment ]
  16. Create a class with a String field that is initialized at the point of definition, and another one that is initialized by the constructor. What is the difference between the two approaches? [ Add Comment ]
  17. Create a class with a static String field that is initialized at the point of definition, and another one that is initialized by the static block. Add a static method that prints both fields and demonstrates that they are both initialized before they are used. [ Add Comment ]
  18. Create a class with a String that is initialized using “instance initialization.” Describe a use for this feature (other than the one specified in this book). [ Add Comment ]
  19. Write a method that creates and initializes a two-dimensional array of double. The size of the array is determined by the arguments of the method, and the initialization values are a range determined by beginning and ending values that are also arguments of the method. Create a second method that will print the array generated by the first method. In main( ) test the methods by creating and printing several different sizes of arrays. [ Add Comment ]
  20. Repeat Exercise 19 for a three-dimensional array. [ Add Comment ]
  21. Comment the line marked (1) in ExplicitStatic.java and verify that the static initialization clause is not called. Now uncomment one of the lines marked (2) and verify that the static initialization clause is called. Now uncomment the other line marked (2) and verify that static initialization only occurs once. [ Add Comment ]
  22. Experiment with Garbage.java by running the program using the arguments “gc,” “finalize,” or “all.” Repeat the process and see if you detect any patterns in the output. Change the code so that System.runFinalization( ) is called before System.gc( ) and observe the results. [ Add Comment ]

[27] In some of the Java literature from Sun they instead refer to these with the clumsy but descriptive name “no-arg constructors.” The term “default constructor” has been in use for many years and so I will use that.

[28] The one case in which this is possible occurs if you pass a reference to an object into the static method. Then, via the reference (which is now effectively this), you can call non-static methods and access non-static fields. But typically if you want to do something like this you’ll just make an ordinary, non-static method.

[29] A term coined by Bill Venners (www.artima.com) during a seminar that he and I were giving together.

[30] In contrast, C++ has the constructor initializer list that causes initialization to occur before entering the constructor body, and is enforced for objects. See Thinking in C++, 2nd edition (available on this book’s CD ROM and at www.BruceEckel.com).

[31] See Thinking in C++, 2nd edition for a complete description of C++ aggregate initialization.

[ Previous Chapter ] [ Short TOC ] [ Table of Contents ] [ Index ] [ Next Chapter ]
Last Update:05/21/2001